Sheet vinyl

Vinyl Roll Flooring Riyadh — One Continuous Sheet, Cut to Your Room

Sheet vinyl is the most seamless way to do vinyl flooring: wide rolls cut to the shape of the room and fully bonded down. We supply and fit it across Riyadh for shops, schools, clinics and homes, after a free visit to measure and pick the width that keeps seams to a minimum.

Fewer seamsFoam or compact?Coved skirting Roll length calculator

Chat on WhatsApp Call now

Herringbone wood-pattern sheet vinyl rolls ready to be cut to size

Light wood-effect vinyl rolls lined up for selection

Cut to sizeSeams planned before we cut

Fully bondedStays put under trolleys and chairs

Several widthsChosen to suit your room

Free visitMeasuring and samples in Riyadh

Supply & fitFrom levelling to skirting

Under the surface

What separates one vinyl roll from another

From across a showroom most rolls look alike. The real differences are in the backing, the wear layer and how the sheet is built — and they decide whether a roll belongs in a bedroom or can survive a school corridor for years.

Foam-backed (cushioned) rolls for homes

A foam layer under the surface makes the floor softer, warmer and quieter underfoot. Great for bedrooms, kids’ rooms and store rooms, but it dents under sharp legs and concentrated loads, so it marks in shops and offices with castor chairs.

Compact rolls for shops, corridors and schools

No foam: the layers are pressed into one dense sheet, often sold as commercial grade. It takes trolleys, wheelchairs and constant traffic, and is always fully glued. A homogeneous version carries the colour through its full thickness, so wear shows slowly — common in healthcare.

Roll width and where the seam falls

Rolls typically come 2 or 4 metres wide, with some ranges at 3 metres. We choose the width that covers your room with the fewest joins, and keep any necessary seam out of doorways and walking lines, running with the light so it disappears. With wood or geometric prints we allow for the pattern repeat so both sides line up, which adds a little length.

Cold-welded or heat-welded seams?

In homes a seam is usually closed with a cold-weld liquid that fuses the two edges. In clinics and commercial kitchens the seam is grooved and a PVC rod is melted in with a hot-air gun, turning the floor into one surface that water and dirt can’t get into.

Designs

Sheet vinyl designs, from timber to nursery prints

Roll vinyl is no longer just hospital grey; today’s prints cover most tastes and uses.

Neutral wood

Printed planks on one continuous sheet — the timber look without real joints.

Grey marble-effect sheet vinyl for entrances, kitchens and shops

Stone and marble

Marble veining and concrete greys for kitchens, entrances and small showrooms.

Solid green, blue and red sheet vinyl for zoning activity spaces

Solid colours

Colour-zone schools, halls and activity rooms.

Colourful puzzle-print sheet vinyl in a nursery

Kids’ prints

Tracks and puzzles for nurseries, kindergartens and playrooms.

Residential roll or commercial roll?

A general comparison of two grades — each product’s data sheet sets its own spec
	Foam-backed residential	Compact commercial
Underfoot	Soft, warm, quieter	Firmer, more stable
Wear layer	Usually thinner	Thicker for constant traffic
Loads and castors	May dent	Copes much better
Fixing	Fully glued, or per product instructions	Always fully glued
Seams	Mostly cold-welded	Heat-welded in hygienic areas
Where we suggest it	Bedrooms, kids’ rooms, annexes	Shops, schools, clinics, corridors

Schools and nurseries need more than the right roll — see school and nursery flooring.

Hygiene detail

Coved skirting: when the vinyl turns up the wall

In clinics, commercial kitchens and laundries, the corner where floor meets wall is where dust and water collect. The fix is to run the sheet itself a short way up the wall over a curved fillet that fills the corner, finished with a capping strip.

Floor and skirting become one piece with no crack, so a mop glides through the corner without leaving dirt behind. It needs straight walls and takes longer than standard skirting, so we decide room by room at the inspection.

No dirt-trapping corners
With welded seams, one continuous surface
Suits clinics and treatment rooms

Clinic flooring requirements

Corridor with grey sheet vinyl coved up the wall into the skirting

Estimate how much you need

How many metres of roll does your room need?

Enter length and width and pick a roll width for an approximate run length. Choose higher waste for prints that need matching.

Length (m)

Width (m)

Waste allowance

Roll width

0Area (m²)

0Suggested order (m²)

0Approx. roll length (m)

Send these sizes and ask for a price

Avoid these

Mistakes that ruin sheet vinyl within months

Gluing over open grout

Sheet mirrors what’s beneath; unfilled tile joints slowly show as dips.

Damp screed

Trapped moisture breaks down the adhesive and causes bubbles and stains.

Cutting straight off the roll

Sheets need to relax flat in the room before final cutting, or edges shrink back.

A seam in the doorway

The busiest spot in the room — that seam opens first, so we plan around it.

Dragging heavy furniture

Metal feet slice the wear layer; lift, or use wide cups.

Strong alkaline cleaners

They dull the surface and weaken cold welds; neutral cleaner is enough.

Sheet vinyl: specific questions we get asked

Can sheet vinyl be loose-laid without glue in a small room?

Some foam-backed residential rolls allow loose laying or perimeter taping in small rooms, depending on the manufacturer’s instructions. In shops, corridors and anywhere with trolleys, full adhesion is essential, otherwise the sheet ripples or creeps at doorways over time. We confirm the right method once we see the room.

How many seams will a room wider than the roll have?

If the room is narrower than the roll, usually none. Wider rooms get one seam per extra width. At the inspection we compare the available widths and laying directions to find the fewest seams and least waste, then put them where foot traffic is lightest.

Will sheet vinyl handle delivery trolleys in a shop?

Yes, if you choose a compact commercial roll with a thick wear layer, fully glued to a flat base. Foam-backed residential rolls aren’t suitable because wheels dent them. At the shop entrance we also suggest a recessed mat to trap sand before it reaches the vinyl.

Can roll vinyl go over ceramic tiles?

It can if the tiles are firmly bonded, but sheet vinyl is thin and shows grout lines, so the joints are filled or the floor gets a thin smoothing coat first. That step is part of the quote, and we assess it after seeing the tiles and joint depth.

How do you repair a cut or burn in sheet vinyl?

The damaged area is cut out as a rectangle, a matching patch is cut from an offcut of the same roll with the pattern aligned, then it is glued and the edges welded. Keep an offcut after installation — new batches can differ slightly in shade.

Is sheet vinyl good value for large areas?

Often, yes: wide rolls cover ground quickly with few pieces, and waste is low in regular rooms. The final cost still depends on levelling, roll grade, welding and coving. Our guide to vinyl flooring prices in Riyadh explains the factors.

Can sheet vinyl cope with water in a laundry room?

The surface doesn’t absorb water; seams and edges are the weak points. With welded seams and the sheet turned up the wall, a laundry is well protected from washing-machine leaks. For every wet-area option, see waterproof flooring. And check the machine hoses now and then.

You may also need

We plan every cut before the roll is opened

Send room sizes and a rough sketch of the doors on WhatsApp, or book a free visit in Riyadh so we can choose the roll width and seam positions.

Open daily 7 AM – 10 PMServing Riyadh city

Chat on WhatsApp Call us now · +966 55 725 1134