Measure at the widest point
Walls are not always parallel. Use the largest length and width so the quantity does not fall short.
The final price of parquet depends on the right quantity, and the right quantity starts with sound measuring and a waste allowance that fits the fitting pattern. This page gives you a simple calculator for area and suggested quantity, and explains the difference in waste between straight, diagonal and herringbone laying, plus how to count skirting, underlay and room-to-room areas. The figure here is for planning and we confirm it at the inspection.


Enter the room length and width in metres, pick a waste allowance to suit the fitting pattern, and you will see the area and suggested order quantity (length × width, then waste added). Work out each room separately and add the results.
Careful measuring prevents an embarrassing shortfall halfway through fitting. Learn the basics in the flooring measurement guide, then check these parquet-specific points.
Walls are not always parallel. Use the largest length and width so the quantity does not fall short.
An L-shaped room becomes two rectangles; add their areas and then the waste.
Parquet usually runs under the door to the middle of the threshold, so add this area if it lies outside the room rectangle.
Laying direction according to light or the longest wall affects cutting and waste. We discuss it with you at the inspection.
When one floor runs between rooms, transitions and expansion gaps must be planned; see expansion gaps in heat.
A rough drawing of each room with the figures makes review easy at the inspection.
Waste in parquet is affected by the fitting pattern more than in other floors, because cutting at the walls creates offcuts that may not be usable in another row, especially with angled or zigzag patterns.
Boards run parallel to a wall, and the offcut at the end of a row can often start the next row, so waste is lower. It is the most common pattern in rectangular rooms, and the steps are in parquet installation in Riyadh.
Boards sit at an angle to the wall, producing triangular offcuts at the edges that usually cannot be reused, so waste rises. It makes a room look wider but costs more in material and time.
Herringbone needs boards cut at a special angle, which raises waste further and may need experienced fitters. For more see herringbone parquet.
The allowances suggested in the calculator are planning rules only. Room shape, the chosen product and the fitter’s experience decide the real figure, which is why we confirm it at the inspection before ordering.
Estimate area, quantity and material cost from the per-metre price in your quote.
Send us the result with photos of the space and we will review it with you at an inspection in Riyadh before the final quantity is agreed.
| Case | Measurements | Area | Suggested quantity |
|---|---|---|---|
| Bedroom, straight laying | 5 m × 4 m | 20 m² | 21 m² with 5% added |
| Lounge, straight laying | 6 m × 4.5 m | 27 m² | 29.7 m² with 10% added |
| Majlis, diagonal laying | 7 m × 5 m | 35 m² | 40.25 m² with 15% added |
| Herringbone room | 4 m × 4 m | 16 m² | 18.4 m² with 15% added |
Record length and width at the widest point, including doorways.
Straight, diagonal or herringbone? The pattern changes waste.
Multiply length by width then add the suitable allowance.
Divide by the pack coverage for the product and round up.
We check them with you at the inspection and correct any figure before ordering.
A parquet quote is not complete with area alone. Several related items need their own counting so there are no surprises in the cost.
Skirting is counted by length, which is the room perimeter minus door openings. The shape and colour you choose change the finished look; see skirting and profiles.
Many types need an underlay beneath the boards, usually covering the same area as the room. Details of the types are in underlay and insulation.
A small gap is left at the walls to let the floor expand with heat and humidity, and the skirting covers it. Large continuous floors may need extra gaps; read how floors expand in heat.
An existing floor may need levelling or a moisture check before fitting. This is not part of the parquet quantity but it affects the budget: concrete subfloor moisture test and floor preparation and levelling.
Using a straight-laying allowance and then choosing herringbone guarantees a shortfall.
Door thresholds need boards too, so do not forget them.
Keep a spare for later repair because the product may not be available later from the same batch.
Parquet needs time to adjust to the environment before fitting, which affects the schedule, not the quantity.
Multiply length by width in metres to get the area, then add a waste allowance suited to the fitting pattern. Split irregular rooms into rectangles.
It is lower for straight laying and higher for diagonal and herringbone. The calculator suggests planning options and the inspection confirms the figure.
No. It gives area and suggested quantity only. Price depends on type, thickness and fitting; see parquet prices.
No. Skirting is counted by length, which is the room perimeter minus door openings.
Many types do, and it usually covers the same area as the room. The types are on the underlay page.
Divide the suggested quantity by the pack coverage stated for the product and round up to a whole number.
The principle is the same, but waste and coverage may differ by product and fitting pattern.
You can calculate each room separately and add them, allowing for expansion gaps and transitions between rooms.
It depends on the area and the condition of the floor, and we do not quote a figure before the inspection.
Use the WhatsApp button under the calculator or contact us with the measurements, photos and preferred fitting pattern.
Send the area you calculated and the fitting pattern you prefer and we will review it with you before the quote is settled.
When sanding works and when to replace.
An option for quality and lifespan.
Quick steps to ask for an offer.
A flooring bill of quantities (BOQ) for projects in Riyadh: room areas, waste, skirting and underlay, and what to put in a tender. Ask us to…