Removing the old floor
Lifting old carpet, vinyl or parquet takes labour, time and waste disposal, and the cost depends on what is being removed.
Before you collect quotations it helps to know how many square metres you really need and roughly what the material will cost. This calculator works out the area and the quantity after waste, then multiplies it by the per-metre price from any written quotation you hold. It is an estimating tool, not a final quotation, because the full cost includes other items we explain below.


The calculator multiplies length by width to give the room area in square metres, then adds the waste percentage you choose, because cuts, corners and doorways consume part of the material. A 5% allowance suits simple rectangular rooms, 10% is the most common, and 15% suits patterns and rooms with many corners.
We do not print a ready price here because price changes with type, thickness, brand and quantity. Enter the per-metre price from a written quotation you already hold from any supplier and you will see an approximate material cost. This lets you compare two quotations on the same footing.
The calculator does not include removal, levelling, underlay, skirting, trims or fitting labour, because these are set after a site visit. The next section reviews each item, and for the price factors of each product see pages such as vinyl prices and parquet prices.
Enter the dimensions, the waste percentage and the per-metre price from your written quotation. The result is an estimate of the material only.
These items do not appear in a per-metre calculation but they shape the final cost. We confirm them with you after the visit and write them into the quotation.
Lifting old carpet, vinyl or parquet takes labour, time and waste disposal, and the cost depends on what is being removed.
If the floor is uneven or cracked it may need filler or a levelling layer. We check with a straightedge before supplying anything.
Some floors need a sound or moisture layer, depending on the product and the subfloor.
Skirting covers the expansion gap and finishes edges, and a profile finishes the change between two rooms or at stairs.
Doors may need trimming, or a threshold may be needed where two levels meet.
If rooms are furnished, emptying and returning items takes time and is best planned in the schedule.
Usually priced per square metre, with cost shaped by thickness, wear layer and locking system. See vinyl price factors.
Price is affected by plank type, finish, thickness, underlay and skirting. See parquet price factors.
Sold in rolls of a fixed width, so waste is higher when cutting. See carpet price factors.
Priced by size or by the metre depending on type. See rug price factors.
Cost depends on pile height, density, the base and drainage. See artificial grass price factors.
Counted by hall area, number of rows and pile quality. See mosque carpet price factors.
Ask each supplier to state type, thickness, quantity and included items, then compare the per-metre price for the same specification, not for different ones.
Add a small reserve for measurements you are unsure of. A small surplus is better than a shortfall that forces a second batch with a slightly different shade.
Add the material cost to every item in the section above to reach a budget closer to reality, then ask for a complete written quotation.
After real measuring and a floor check some figures will shift slightly. The free visit is the route to an accurate final quotation.
A room 6 metres long and 4 metres wide has an area of 24 square metres. With 10% waste the order quantity becomes 26.4 square metres. If the per-metre price in your quotation is X, the approximate material cost is 26.4 multiplied by X. Replace X with the real figure from your quotation.
Add the room areas one by one, then apply waste to the total or to each room depending on how complex it is. Rooms with corners and columns need more waste than rectangular rooms. For details see the flooring measuring guide.
Forgetting the area under fixed furniture or small passages reduces the quantity and delays the job.
A cheaper quote may mean a thinner plank or a weaker protective layer, so ask for the specification in writing.
No floor is installed without waste, and a shortfall can mean a second batch in a slightly different shade.
The final cost can rise when damp or unevenness appears during the job with no budget set aside for it.
No. It estimates quantity and material cost from the price you enter. The final price includes supply, fitting and preparation and is set after the site visit.
From any written quotation you have received, or send us the floor type and area and we will send an offer after the visit.
5% for simple rectangles, 10% for most rooms and 15% for patterns and many corners. The visit sets the most suitable figure.
Split the space into rectangles, calculate each one and add them. For complex shapes we measure on the visit.
Yes for a general estimate per square metre, but carpet is sold in rolls of fixed width so waste rises when cutting. See the roll cutting calculator.
Yes. We arrange a free visit inside Riyadh, measure, check the floor and then send a written quotation.
Yes. Send the dimensions and photos of the rooms by WhatsApp or call us, and we reply with suitable options and a visit date.
Yes. Work out the area and quantity first, then try the prices of different types to compare.
Send the measurements or photos of the space and we will arrange a free visit and a clear quotation.
How to measure rooms accurately before ordering.
Work out waste when cutting rolls.
An item that can raise cost if ignored.
When you need a backing layer.
Details that finish the edges neatly.
How long each type takes roughly.