It measures the surface
The class concerns how well the top layer resists scratching and abrasion, and says nothing alone about the board’s core or its water resistance.
Many laminate and wood-look floors carry an AC code followed by a number that signals how well the surface resists wear. We explain what each class means, what suits a home, office or shop, and what the number does not measure.


AC stands for Abrasion Class, a rating given by manufacturers to laminate boards based on standard tests of the surface, and it is widely used to compare products.
The class concerns how well the top layer resists scratching and abrasion, and says nothing alone about the board’s core or its water resistance.
A higher class signals tolerance for busier use, and makers normally recommend higher classes for commercial spaces.
Two boards can share a class yet differ in locking system, density and moisture protection.
We compare the class against thickness, density and the written warranty in the datasheet before recommending.
Details vary between brands, but this general picture helps with quick comparison. The final reference is always what the manufacturer states for the specific product.
Common for residential use and generally suitable for bedrooms and living rooms. With heavy traffic or pets you may prefer a higher number. See footstep noise in apartments.
Typical for busy homes, light offices and small shops, sitting midway between domestic and commercial use.
Normally used for heavier commercial spaces; it can be more than a quiet bedroom needs but is useful at entrances and in corridors.
Offered by some makers for heavy commercial use; not every product reaches it, and it suits busy shop floors.
A thicker board and a tight locking system improve stability, but class alone does not make up for a weak lock. We explained thickness for vinyl in the thickness and wear layer guide.
The class does not indicate water resistance, so a high-AC board can still swell after a leak. See parquet swelling.
Boards differ in HDF core density, which affects load and impact performance and is usually listed in the specification. Read the HDF parquet guide.
Sometimes the better choice is a moderate class with an excellent lock and correct fitting rather than a high class fitted badly or on an unprepared floor.
Quiet home, office or shop; the place sets the expected traffic.
The number of people, pets and outdoor shoes matters more than room size alone.
Read the class with thickness, density, moisture resistance and the written warranty.
Good subfloor preparation, gaps and locking are part of performance; see parquet installation.
Choose the class that covers your use without paying for more than you need.
| Class | Typical use | Note |
|---|---|---|
| AC3 | Normal residential | Suits living rooms and bedrooms with moderate traffic |
| AC4 | Busy home or light commercial | A middle option for corridors and small offices |
| AC5 | Heavy commercial | Suits entrances and shops |
| AC6 | Very heavy commercial | Offered by some makers in certain ranges |
Some people assume AC means water resistance, but water is a separate matter of board edges and core material. For damp areas we suggest products made for them, as in waterproof flooring.
Buyers also overlook that test methods differ between brands, so do not compare one brand’s number with another’s without checking the specification sheet.

Higher classes are often priced higher, but the gap varies between brands so we do not quote a general figure.
Special patterns and thicker boards change the price regardless of class.
Underlay, levelling and moisture work are priced by site.
Area plus a waste allowance is worked out at the visit. Compare quotes with our quotation comparison guide.
A wear class that usually suits moderate residential use in bedrooms and living rooms.
Usually not. It suits dense commercial use, and a lower class with good fitting often serves a home well.
No, the class concerns the surface only; water resistance is a separate matter.
The scales are similar but test details and naming can vary, so read the specific product sheet.
A warranty can depend on class and intended use, so ask about its terms. See warranty questions.
Often a medium to high class depending on visitor numbers, which we suggest once we know the business.
Send the type of space and area on WhatsApp and we will suggest a material and arrange a site visit.
Send the type of space and area on WhatsApp and we will suggest a material and class and arrange a free visit.
What to ask the supplier.
Care and repair.
Choosing a material for busy floors.
Heat and dust.
Comparing floor materials.
All parquet types.