Open daily 7 AM – 10 PMFree site inspection in Riyadh
Chat on WhatsAppCall us now · +966 55 725 1134
Comparison guide

How to Compare Flooring Quotations in Riyadh: Finding the Right Offer

When three quotations arrive for the same room at three different prices, it is hard to tell which is the right one. The difference is often not quality but what is included and what is left unsaid. This checklist helps you compare quotes on one basis: specification, quantity, fitting, preparation and extras, so you can choose with confidence. From us you receive an itemised quotation after a free site visit anywhere in Riyadh.

Inside the Tiraz Najd showroom in Riyadh where flooring samples are displayed
Different flooring samples compared side by side
Itemised quotationEvery item written down
Free site visitMeasuring and floor check across Riyadh
Supply and fittingSkirting and trims included
Real samplesCompare the look and feel in person
DailyWe take requests 7 am – 10 pm
Basis of comparison

What should every flooring quotation state?

The full specification

A good quotation names the floor type, the thickness, the wear layer where it applies, the fitting method and the colour or texture. A phrase such as premium vinyl is not enough. Ask for the specification to be written exactly as on the sample you saw so it cannot change at delivery.

Quantity and waste

Ask which area was used and what waste percentage was applied. A quote that assumes less area than the room really has will look cheaper and then rise when there is a shortage. Check it yourself with the flooring cost calculator and the flooring measuring guide.

What is included and what is excluded

Make each quotation say whether it covers supply only or supply and fitting, and whether it includes removal, levelling, underlay, skirting, trims and door adjustments. Most surprises come from items that were not mentioned in the first offer.

Comparison grid

Six items to compare quote against quote

Put the quotations in a simple table and compare the items below row by row. The real differences will appear.

Material type and thickness

Is it the same type, the same thickness and the same protective layer? A thickness difference alone can explain a price gap.

Quantity after waste

Compare the area and the waste in each offer. A smaller area often just means a price that only looks lower.

Fitting

Is the fitting charge inside the price or separate? Does the work include basic floor preparation?

Skirting and trims

Edge details change the finished look and the cost, and they can be missing from one quote and present in another.

Removal and levelling

If there is an old floor, are removal and disposal included? Is levelling covered?

Timeline and start date

Ask about the expected duration and the start date. Delay costs money too, especially in shops and offices.

Red flags

When to pause before you accept a quotation

A price far below the rest

Before celebrating, ask about thickness, wear layer, quantity and what is included. A large gap needs a clear explanation.

Verbal promises only

Anything you rely on, such as warranty, duration or specification, should be written in the quotation or a simple contract.

Fitting missing or vague

A fitting charge may be added later. Ask whether fitting and preparation are included.

Pressure to decide fast

A serious offer lets you compare samples and figures before you transfer money or sign.

Comparison steps

Practical steps to compare with confidence

Collect quotes in writing

Ask for every quote in writing, even by message. A verbal quote cannot be compared.

Use one basis

Give every supplier the same area, the same photos and the same specification so you are not comparing different rooms.

Put the numbers in a table

Record the six items above, the total price and the per-metre price after extras for every quote.

Inspect the sample

Compare samples of the same material in the room light before deciding. We arrange this during the free visit.

Questions for the supplier

Questions to ask every supplier before paying

Before delivery

Is the sample I saw the same as what will arrive? Where does the quantity come from? Are the cartons from one batch? Different batches can show a slight shade difference, which matters on large areas.

During the work

Who supervises the fitting? How are furniture and doors protected? When is the space handed over clean? These details affect your comfort more than a few riyals per metre.

After handover

How does the supplier handle a remark that appears weeks later? What care advice is given for the floor? Use the floor handover checklist to confirm the basic points at handover.

A smarter decision

The cheapest price is not always the best value over time

Cost of use, not only purchase

A floor is used for years. A small gap in the per-metre price may be matched by a large gap in surface life, ease of cleaning and how often it needs attention. Look at what you will pay over the period of use, not only today’s figure.

Quality shows in the details

Carpet density, the wear-layer thickness of vinyl, the adhesive and the quality of the skirting decide how the floor looks after a year or two. These do not show in a photo, but they show in the sample and the written specification. They are explained in carpet quality and density and vinyl thickness and wear layer.

The space sets the priority

A quiet bedroom is different from a busy shop entrance or office. A good economical specification may be enough in the first, while the second deserves a higher wear rating. Tie the budget to real use so you do not pay for what you do not need and do not save where you should not.

How we write ours

What goes into the quotation we send you

Specification

We state the type, colour and thickness according to what you chose on the sample.

Quantity

We show the measured area and the expected waste so you can see how the total was reached.

Included items

We write what supply and fitting cover and what needs a separate line such as removal or levelling.

Timing

We agree a start date and an approximate schedule after the visit, and tell you about any change.

Estimate how much you need

Estimate your area before comparing quotes

Enter the length and width to get the area and a suggested quantity after waste, then check that each quote uses roughly the same figure.

0Area (m²)
0Suggested order (m²)
Send these sizes and ask for a price

Questions customers ask

How many quotations should I collect?

Two or three usually suffice, provided they are all built on the same area and specification so the comparison is fair.

Is the cheapest quote the best?

Not necessarily. Compare specification, included items, quantity and fitting before judging, because a low price can hide missing items.

Can I compare a vinyl quote with a parquet quote?

You can compare budgets, but the two differ in use and lifespan. See vinyl, parquet or tiles for the general comparison.

What if the quote does not mention waste?

Ask the supplier which area and waste percentage were used and compare with your own figure from the cost calculator.

Do I need a site visit before any quote?

A visit makes the quote more accurate because it reveals flatness, moisture and heights. We offer a free visit inside Riyadh.

Can I ask for a sample before paying?

Yes, it is your right. Compare the sample in the room’s own light before confirming colour and type.

How do I request a quotation from you?

Send measurements or the area, photos of the space and the type of use by WhatsApp, or call us. We arrange a free visit and then send a written quotation.

Can you review a quote from another supplier?

You can send us its items and we will point out what is missing or needs checking, and you decide for yourself.

Send us your quotes or ask for an itemised offer

Send the measurements or photos of the space and we will arrange a free visit and a clear quotation.

Open daily 7 AM – 10 PMServing Riyadh city

More guides and services you may find useful

Call nowChat on WhatsApp