Open daily 7 AM – 10 PMFree site inspection in Riyadh
Chat on WhatsAppCall us now · +966 55 725 1134
Vinyl flooring comparison

SPC vs WPC Flooring in Riyadh: Which Vinyl Should You Choose?

Many customers hear SPC and WPC and assume they are the same thing. Both are rigid click-lock vinyl planks that handle moisture well, but the core is built differently, and that changes how the floor feels, how it wears and where it works best. This page explains the difference in plain language, then we supply and fit the floor you choose anywhere in Riyadh.

Boxed SPC vinyl planks ready for installation on a Riyadh project
Close-up of an oak wood texture on a vinyl plank
Compared with samplesWe show both types side by side
Free site visitMeasuring and floor check across Riyadh
Supply and fittingSkirting and trims included
Real samplesCompare the look and feel in person
DailyWe take requests 7 am – 10 pm
Core construction

What actually differs inside the plank?

The SPC core

SPC stands for Stone Plastic Composite. The core blends ground limestone with PVC to form a dense, rigid plank. Its main strengths are dimensional stability when temperatures change and good resistance to dents under heavy furniture and point loads. Because it is dense, an SPC plank is often thinner than a WPC plank of similar performance, and it is common in living rooms, offices and shops.

The WPC core

WPC stands for Wood Plastic Composite. In most products the core is lighter and foamed, which gives it some flexibility. The result is a plank that feels warmer and softer underfoot and absorbs a little more sound, but it can mark more easily under concentrated pressure such as the base of a heavy cabinet. Products vary between manufacturers, so we never rely on the name alone and review the actual specification of the sample with you.

Wear layer and print

How long a floor lasts in daily use is not decided by the type name alone. The wear layer over the print, the quality of the printing and the protective coating matter just as much. An SPC plank with a thin wear layer can struggle in a busy entrance before a WPC plank with a stronger layer does. Always ask for the wear-layer thickness, and see the vinyl thickness and wear layer guide for details.

Quick comparison

Six points that separate the two types

These are common differences. Details vary from product to product, so we confirm them on the exact sample you pick.

Feel underfoot

WPC is usually softer and warmer when you walk for long periods, while SPC is firmer and closer to a hard floor. If you can, test both barefoot.

Dent resistance

The dense SPC core generally handles point loads such as table legs and cabinets better, which matters in majlis rooms and offices.

Sound

The foamed WPC core usually softens footstep noise, which helps in apartments and upper floors. SPC can be improved with a suitable underlay.

Moisture and water

Neither type swells from surface water the way a wood parquet can. Both suit kitchens and entrances with good edge sealing and fitting.

Stability in heat

Riyadh summers expand and contract planks. The dense SPC core tends to be more stable, and with both types we leave an expansion gap at the walls.

Uneven subfloors

Any click plank needs a flat floor, though WPC forgives small flaws slightly more. We check flatness with a straightedge before supplying.

Choosing by space

Which type suits which room?

Living room and majlis

Heavy traffic and heavy furniture usually point to SPC with a good wear layer, plus felt pads under furniture legs.

Bedrooms

Warmth and quiet matter most, so WPC is a comfortable choice, especially on upper floors where footsteps carry.

Offices and shops

Constant traffic and chair wheels put durability and stability first, which suits SPC with a high wear layer.

Kitchen and dry bathroom

Both are acceptable with sound fitting and sealed edges. We do not recommend leaving either under standing water.

What we show you

Samples you can handle before you decide

Boxed SPC vinyl planks with a wood-look finish

Click-lock planks

We show planks in different thicknesses so you can feel the weight and rigidity yourself.

Oak texture on a vinyl plank surface in close-up

Texture and coating

We hold the sample to the light so you can compare the depth of the texture and the gloss of the top layer.

Living room with wood-look vinyl flooring and a view over Riyadh

The finished look

We help you picture the colour with your walls, furniture and lighting instead of relying on a small photo.

Steps to decide

Four steps to a confident choice

Define the use

A quiet bedroom or a busy entrance? Heavy furniture or chair wheels? Use decides more than the name.

Ask about the wear layer

Ask for the written specification of the sample. A thicker wear layer means a longer life for the surface under hard use.

Check your current floor

We measure flatness and check moisture before supplying, which decides the success of the job more than the type does.

Compare quotes on the same basis

Compare type, thickness, wear layer, written warranty, fitting and skirting, not the price alone.

Before you buy

Common mistakes when comparing the two

Judging from a photo

Catalogue photos show the print under perfect light. A wood tone looks different in a room that gets strong Riyadh sunshine than in a dim hall, so we suggest laying the sample on the floor of the actual room, morning and evening, before approving it.

Trusting the label over the specification

You can find an excellent WPC and a poor SPC, and the reverse. What matters is total thickness, wear-layer thickness, the locking system, edge finish and colour consistency between boxes. We go through these points in writing rather than relying on general promises.

Skipping floor preparation

The best plank fails on an uneven or damp floor. Gaps show up as noise and joint separation within months. Good preparation saves you from redoing the job, and the basics are in floor preparation and levelling.

Forgetting the expansion gap

Floating planks need a small gap at the walls that the skirting covers. Ignoring it can make planks lift in summer heat. We set the gap in every room and cover it with suitable skirting.

After installation

Looking after the floor so it lasts

Daily cleaning

A soft broom or a slightly damp mop with a neutral cleaner. Avoid soaking the floor and avoid abrasive products that scratch the top layer.

Protect the legs

Fit felt pads under furniture and avoid dragging heavy items. This causes most scratches and dents.

Sun protection

On sunny facades use curtains or a window film to reduce direct light on the colour over time.

Entrance mat

Place a doormat at the entrance to reduce the sand and dust that scratch the surface, which is common in Riyadh.

Pricing

What affects the price of each type?

We do not print fixed numbers here because price changes with thickness, wear layer, brand, texture, locking system, quantity and the condition of your current floor. In general, the gap between the two types is small compared with the effect that wear-layer quality and fitting quality have on the result after a few years.

Send us the area and photos of the rooms and we will give you a clear itemised quotation covering supply, fitting, skirting and trims. The factors are explained in vinyl price factors, and measuring is covered in the flooring measuring guide.

Estimate how much you need

Estimate the room area with waste

Enter the length and width to get the area and a suggested order quantity after waste. It works for either type.

0Area (m²)
0Suggested order (m²)
Send these sizes and ask for a price

Questions customers ask

Is SPC always better than WPC?

No. SPC is usually firmer and more stable, while WPC is softer and quieter underfoot. The better one is the one that fits the room, the wear layer and the quality of the fitting.

Which is better for the kitchen?

Both resist surface water without swelling and work in kitchens with good fitting and edge sealing. We avoid leaving either under standing water. See also kitchen and bathroom vinyl.

Can both be installed over tiles?

In most cases yes, when the tiles are firm and flat and deep grout lines are treated first. Details are in installing vinyl over tiles.

Does either make noise when walked on?

Noise depends on the plank, the underlay and how flat the floor is. WPC usually softens echo, and SPC can be improved with a suitable underlay and sound fitting.

Do I need an underlay?

It depends on the product and the floor. Some planks come with an attached backing. We decide after the visit, and you can read more in the underlay and insulation guide.

Will they fade in the sun?

Long direct exposure can affect any floor. Curtains or window film are advisable on strongly sunlit facades.

Should I ask for a sample first?

Yes. We recommend comparing both samples in the real light of the room, and we can arrange this during the free site visit.

What should I send to get a quotation?

Send room measurements or the approximate area, photos of the current floor and the type of use through WhatsApp, and we will reply with suitable options.

Book a free site visit and compare SPC and WPC on your own floor

Send the measurements or photos of the space and we will arrange a free visit and a clear quotation.

Open daily 7 AM – 10 PMServing Riyadh city

More guides and services you may find useful

SPC or LVT?

How the vinyl types differ in rigidity and use.

Call nowChat on WhatsApp