Load capacity
Cars, lifts and shelving press on specific points, so the concrete below must be sound and the material suited to the load.
Garages and workshops are among the hardest places for a floor: heavy vehicles, oil stains, dust, heat and sometimes damp. We help you in Riyadh decide on the right floor for your space, explaining when preparing the concrete is enough and when a stronger solution is needed, with a free visit before any commitment.


We separate a home garage for one or two cars from a workshop with heavy equipment, because each has different criteria. We do not promise one solution that fits everyone.
Cars, lifts and shelving press on specific points, so the concrete below must be sound and the material suited to the load.
Oil, petrol and cleaners drip on the floor, and an easy-wipe surface keeps its look and reduces slipping.
Garages in Riyadh get very hot in summer, and some materials are affected by heat and hot tyres.
A smooth floor with oil is dangerous underfoot. We need a surface with safe grip even when wet.
A slight fall toward a drain stops water pooling when washing, and we check falls before work.
A surface you can sweep and wash quickly without it absorbing stains saves time and effort.
We do not recommend a material before seeing the existing floor and understanding the use. These are the main solutions normally discussed for this kind of space, with the limits of each.
In some home garages it is enough to clean the concrete, repair cracks, level it and protect it with a suitable coating or sealer. It remains simple and cheaper, but adds no resilience and does not hide concrete flaws.
Plastic or similar interlocking tiles are available that lay without glue and can be lifted when needed. They suit home garages and car showrooms. Check the permitted load against the specification.
For showrooms and light workshops that do not face heavy loads, project vinyl can be a clean, good-looking answer. See vinyl rolls and car showroom flooring.
Heavy industrial loads need a specialist industrial flooring contractor, and we will be frank if your project is outside what we supply and point you to what suits.
| What it offers | What to watch for | |
|---|---|---|
| Prepared, protected concrete | Simple, quick and relatively economical | No resilience and it shows concrete flaws |
| Interlocking tiles | Quick fitting, removable and replaceable | Affected by severe loads; needs a suitable specification |
| Project vinyl | Clean look and easy cleaning | Not for very heavy loads or heavy oil |
| Specialist industrial system | Handles heavy loads and equipment | Needs a specialist contractor and a bigger budget |
The final choice depends on the load, the use and the present condition of the floor, which we explain after the visit.
Most garage floor failures come from preparation, not the material. That is why we give this stage great attention before any quote.
Small cracks can be treated, but large or moving ones need the cause of movement studied. A flaking surface must be removed or treated before any coating or fitting.
Oil soaked into concrete stops most coatings and adhesives bonding, so it is cleaned with suitable methods before the next step.
If the floor sits directly on soil, moisture may rise through it. We advise testing before fitting, as in concrete moisture testing.
Falls toward drains are reviewed so water does not collect when washing. For levelling see floor preparation.
If the garage has old tile or vinyl that will be lifted, see removing old flooring for the steps.
We inspect the floor and note cracks, falls and where water collects.
We ask about vehicles, equipment, spilled materials and working schedule.
We present realistic options and explain the limits of each.
We prepare the floor and fit to the chosen material’s specification.
We hand over cleaning guidance and any wait time before vehicles can enter.
Oil and dust stop adhesion so the coating peels fast. Cleaning is the foundation.
Ground moisture lifts layers. Test it before covering.
Home-grade materials can fail under load, so we choose by use.
Some systems need time before use, and respecting it protects the floor.
Enter the length and width of each room to get the area in square metres, then send the result on WhatsApp with photos of the space.
It depends on your use. For a normal garage, preparing and protecting the concrete or suitable interlocking tiles may be enough. We review load and condition before recommending.
It may suit showrooms and light workshops that do not face heavy loads or lots of oil. We do not recommend home-grade vinyl for vehicles.
Some materials are affected by heat and hot tyres in summer, so we ask about use and recommend a suitable material.
Oil stains need proper cleaning before any new floor. We check them on the visit and explain the best method.
Small cracks can be treated, while moving ones need their cause checked. We decide on the visit and do not promise before seeing it.
It depends on the solution; some systems need a wait before vehicles drive on. We explain this before we start.
Sweep and wash with a suitable cleaner, avoiding solvents that react with the material, and we give instructions for the chosen type.
Yes, within what we supply, and we handle projects by quantity and specification after the visit.
Cost varies with area, solution and preparation, so we give a quote after the visit instead of general numbers.
Send photos and rough measurements on WhatsApp and we will reply with suitable options and a visit date.
Before fitting over concrete.
When it fits and the alternatives.
Criteria for choosing floors.
Moisture and drainage.
Project dealings.
Floors that survive washing.
Choosing flooring for a laundry room, utility room or store in Riyadh: water and slip resistance, washing machine weight,…